RL V6-3.5L (2007)
Disconnecting
To release the lock, pull the spring-loaded sleeve (A) and the slider (B) while holding the opposite half of the connector. Then pull the connector halves
apart. Be sure to pull on the sleeve and not on the connector half.
Connecting
Hold both connector halves, and press them firmly together until the projection (e) of the sleeve-side connector clicks.
Opening the SRS Unit Shorting Connectors For Diagnosis
Special Tools Required
SRS Short Canceller 070AZ-SAA0100
NOTE:
-
To prevent damage of the connector cavity, insert the SRS short canceller straight into the cavity from the terminal side.
-
Before installing the short canceller, wash it with electrical contact cleaner, then air blow it dry.
-
Do not use the short canceller if it is damaged.
-
Make sure to remove the short canceller before reconnecting.
