RL V6-3.5L (2007)
Seat Belt: Testing and Inspection
Inspection
Out of Vehicle
For front seat belt retractor with seat belt tensioner, review the SRS component locations, and the precautions and procedures before performing repairs
or service
Retractor
1. Before installing the retractor, check that the seat belt can be pulled out freely.
2. Make sure that the seat belt does not lock when the retractor (A) is leaned slowly up to 15 degrees from the mounted position. The seat belt
should lock when the retractor is leaned over 40 degrees. Do not attempt to disassemble the retractor.
3. Replace the seat belt with a new assembly if it does not function properly. Do not disassemble any part of the seat belt for any reason.
In-vehicle
1. Check that the seat belt is not twisted or caught on anything.
2. After installing the anchors, check for free movement on the anchor bolts. If necessary, remove the anchor bolts and check that the washers and
other parts are not damaged or improperly installed.