RL V6-3.5L (2007)
Seat Belt Tensioner: Testing and Inspection
E-Pretensioner Operation Check
E-pretensioner Operation Check
1. Shift the transmission to the P position, and release the parking brake.
2. Connect the HDS to the DLC.
3. Sit in the driver's and front passenger's seat, and fasten the seat belts.
4. Make sure the SRS indicator comes on for about 6 seconds after turning the ignition switch ON (II), then goes off. If the SRS indicator does not
come on, check for DTCs with the HDS.
NOTE: If any DTC is indicated, do the indicated DTCs troubleshooting, then go to step 5.
5. Start the engine.
6. Select the E-PRETENSIONER with the HDS, and do the E-PRETENSIONER OPERATION CHECK. Make sure the E-pretensioners retract both
driver's and front passenger's seat belts several times.
7. Turn the ignition switch OFF and make sure the SRS indicator goes off.
