RL V6-3.5L (2007)
Evaporator Temperature Sensor / Switch: Service and Repair
Evaporator Temperature Sensor Replacement
1. Remove the driver's dashboard undercover.
2. Disconnect the connectors (A) from the power tilt/telescopic steering control unit, the adaptive front lighting control unit, the electronically
controlled power steering control unit, and the daytime running lights control unit. Remove the relay (B) and the power tilt/telescopic steering
control unit (C), then remove the self-tapping screws and the bracket (D).
3. Disconnect the connectors (A) from the evaporator temperature sensor and the driver's cool vent control motor, then remove the connector clip
(B). Remove the self-tapping screw and the evaporator temperature sensor (C).
4. Install the sensor in the reverse order of removal.
