RL V6-3.5L (2007)
7. Remove the strainer case (A), the fuel gauge sending unit (B), the wire harness (C), and the fuel pressure regulator (D).
8. Install the parts in the reverse order of removal with a new base gasket (E) and a new O-ring (F), then check these items:
-
Make sure the connection is secure and the suction filter (G) is firmly connected to the fuel pump (H).
-
Connect the transfer tube.
-
When connecting the wire harness, make sure the connection is secure and the connectors (I) are firmly locked into place.
-
When installing the fuel gauge sending unit, make sure the connection is secure and the connector is firmly locked into place. Be careful not to
bend or twist it excessively.
