RL V6-3.5L (2007)
7. Raise the vehicle on the hoist to full height.
8. Tighten the two bolts (A) securing the A/C condenser fan shroud.
9. Install the harness clamps (B) and connector (C) to the A/C condenser fan shroud.
10. Install the splash shield.
11. Lower the vehicle on the hoist.
12. Connect the positive cable to the battery first, then connect the negative cable.
13. Install the upper grille cover (A) then install the left upper fender trim (B) battery trim (C), and right upper fender trim (D).
14. Enter the anti-theft codes for the radio and the navigation system, then enter the customer's audio presets.
15. Do the power window control unit reset procedure.
16. Do the steering column position memorization procedure.
17. Set the clock.
