RL V6-3.5L (2007)
Tilt Wheel Motor: Service and Repair
Power Tilt Motor/Position Sensor Replacement
1. Remove the steering column.
2. Remove the power tilt motor/position sensor connector (A) from connector bracket (B).
NOTE: The power tilt motor/position sensor connector is sky blue, and power telescopic motor/position sensor connector is white.
3. Remove the power tilt motor/position sensor (A) from steering column.
NOTE: Do not let dirt or other foreign materials get inside of the steering column.
4. Install the new power tilt motor/position sensor (A) and align the matching surface and screw holes.
NOTE:
-
Do not weight engagement part.
-
If the tilt motor gear is not properly engage with the tilt gear, the screw holes can not be aligned with the steering column. In that case, move
the tilt gear (B) with the hex wrench (C) to engage the tilt motor gear with the tilt gear.
5. Loosely install the four screws, then tighten the screws (A) first, and tighten the screws (B) to the specified torque.
