RL V6-3.5L (2007)
Tire Pressure Module: Service and Repair
TPMS Control Unit Replacement
NOTE: Make sure the TPMS control unit mounting base is not bent or twisted as this may effect communication with the indicators and the tire
pressure sensors.
1. Remove the rear shelf.
2. Disconnect the TPMS control unit connectors (A).
3. Remove the TPMS control unit (B).
4. Install the TPMS control in the reverse order of removal.
5. Connect the HDS, and memorize the pressure sensor IDs. Do not memorize the IDs automatically.
