RL V6-3.5L (2007)
20. Measure the resistance between each connector terminal of the shift solenoid valve and body ground.
Standard: 12-25 Ohms
-
Replace the solenoid valve if the resistance is out of standard.
-
If the resistance is within the standard, go to step 21.
21. Connect the negative battery terminal to body ground, and connect the positive battery terminal to each solenoid terminal individually.
-
If a clicking sound is heard, go to step 22 and replace the solenoid harness.
-
If no clicking sound is heard, go to step 23 and replace the shift solenoid valve.
22. Remove the solenoid harness, and install a new O-ring (A) on the solenoid harness connector (B), and install the connector in the transmission
housing.
23. Remove the mounting bolts, then remove the solenoid valves.