RL V6-3.5L (2007)
Shift Cable: Service and Repair
Shift Cable Replacement
1. Raise the vehicle, and make sure it is supported securely.
2. Remove the center console cover.
3. Shift the transmission into the R position.
4. Remove the nut securing the shift cable end.
5. Press the holder lock release (A), and pull out the socket holder (B) to remove the shift cable (C) from the shift lever bracket base (D).
6. Make sure you have anti-theft codes for the audio system and navigation system (if equipped), and write down the audio presets ('05-06 models).
Make sure the ignition switch is OFF.
7. Remove the battery trim and left upper fender cover.
8. Disconnect the negative terminal from the battery, then disconnect the positive terminal.
9. Remove the battery hold-down bracket, and remove the battery and battery tray.
10. Remove the air intake duct and air cleaner housing.
11. Remove the battery base.
12. Remove the nuts securing the shift cable bracket (A).
