RL V6-3.5L (2007)
30. Remove the 6.0 mm (0.24 in.) pin that was installed to hold the shift lever.
31. Install the battery base.
32. Install the air intake duct and air cleaner housing.
33. Install the battery tray, battery, and battery hold-down bracket, then connect the battery terminals.
34. Install the left upper fender cover and battery trim.
35. Move the shift lever to each position, and verify that the A/T gear position indicator follows the transmission range switch.
36. Allow all the wheels to rotate freely.
37. Start the engine, and check the shift lever operation in all gears.
38. Push the shift lock release, and verify that the shift lever releases.
39. Reinstall the center console cover.
40. Enter the anti-theft codes for the audio system and navigation system (if equipped) and set the clock, and enter the audio presets ('05-06 models).
41. Do the steering column position memorization procedures.
42. Do the power window control unit reset procedure.
