RL V6-3.5L (2007)
Is there continuity?
YES - Go to step 7.
NO - Repair an open in the wire between cable reel 20P connector terminal No. 15 and ground (G503), or repair a poor ground (G503).
7. Check for continuity between cable reel 20P connector terminal No. 6 and body ground.
Is there continuity?
YES - Repair a short to body ground in the wire between cable reel 20P connector terminal No. 6 and PCM connector terminal D15.
NO - Go to step 8.
8. Turn the ignition switch ON (II), and shift to the M position.
9. Measure voltage between cable reel 20P connector terminals No. 6 and No. 15.
Is there battery voltage?
YES - Replace the cable reel.
NO - Go to step 10.
10. Measure voltage between PCM connector terminal D15 and body ground.
