RL V6-3.5L (2007)
Seals and Gaskets: Service and Repair
Center Case Front Oil Seal Replacement
Center Case Front Oil Seal Replacement
Special Tools Required
-
Companion flange holder 07XAB-0010101
-
Oil seal driver D 070AD-RJC0150
-
Inner driver handle 40 07746-0030100
1. Remove the rear differential.
2. Raise the locknut tab (A) from the groove of the input shaft, making sure that the tab completely clears the groove to prevent damaging the input
shaft.
3. Install the companion flange holder on the companion flange.
4. Loosen the locknut (A) counterclockwise so that its tab (B) comes out from the groove (C) in the input shaft.
5. Tighten the locknut (A) until its tab (B) aligns with the groove (C).
