RL V6-3.5L (2007)
Drive/Propeller Shaft: Service and Repair
Propeller Shaft Removal
Propeller Shaft Removal
NOTE: Do not drop or damage the propeller shaft during removal.
1. Raise the vehicle off the ground, and support it with safety stands in the proper locations.
2. Remove exhaust pipe B.
3. Remove the No. 1 propeller shaft protector.
4. Make a reference mark (A) across the propeller shaft (B) and transfer companion flange (C).
NOTE: Wrap the length of each propeller shaft with cardboard, at least 5 mm thick, before removing the propeller shaft.
5. Remove the nuts (D).
6. Make a reference mark (A) across the propeller shaft (B) and rear differential companion flange (C).
