RL V6-3.5L (2007)
Axle Shaft Assembly: Service and Repair
Dynamic Damper Replacement
Dynamic Damper Replacement
Special Tools Required
-
Bearing separator 07KAF-PS30200
1. Remove the inboard joint and outboard joint.
2. Mark the following position on the driveshaft (A).
Left driveshaft: 319.5 - 323.5 mm (12.58 - 12.74 inch)
Right driveshaft: 301.5 - 305.5 mm (11.87 - 12.03 inch)
3. Remove the dynamic damper (A) using the special tool and a press as shown.
4. Install the dynamic damper (A) to the marked position using the special tool and a press as shown.