RL V6-3.5L (2007)
Window Shade: Overhaul
Rear Window Sunshade Disassembly/Reassembly
NOTE:
-
Put on gloves to protect your hands.
-
Take care not to scratch the sunshade screen and related parts.
1. Remove the left arm holder from the screen plate, and remove the left screen holder (NOTE: It is pre-loaded), then slide the screen completely out
of the screen base.
2. Reassemble in the reverse order of disassembly, and note these items:
-
Before attaching the screen holder, rotate the shaft five times to pre-load the screen, then attach the screen holder and the arm holder while
maintaining the pre-load.
-
Be sure the ground lead is installed securely.
-
Apply multipurpose grease to each pivoting portion of the sunshade as shown.
