RL V6-3.5L (2007)
Window Shade: Testing and Inspection
Control Unit Input Test
Control Unit Input Test
1. Remove the rear shelf under cover.
2. Disconnect the 5P connector (A) from the power rear window sunshade control unit (B).
3. Inspect the connector and socket terminals to be sure they are all making good contact.
-
If the terminals are bent, loose or corroded, repair them as necessary and recheck the system.
-
If the terminals look OK, go to step 4.
4. Reconnect the connector to the control unit, and make these input tests at the connector.
-
If any test indicates a problem, find and correct the cause, then recheck the system.
-
If all the input tests prove OK, the control unit must be faulty; replace the power rear window sunshade.
