RL V6-3.5L (2007)
8.
Install the wiper motor onto the new wiper linkage by aligning the arrow on the link with the middle mark on the wiper motor mounting base.
9.
Install the wiper linkage/motor assembly onto the vehicle, then reconnect the 5P wiper motor connector to the wiper motor.
10.
Turn the ignition switch to ON (II). Turn the wiper switch on and then off to verify that the linkage is in its park position.
11.
Reinstall the driver's side cowl cover, then install the passenger's side cowl cover. Replace any damaged trim clips.
12.
Reinstall the cowl cover upper trim. Replace any damaged trim clips.
13.
Install the original passenger's side wiper arm assembly and the new driver's side wiper arm assembly.
Disclaimer
