RL V6-3.7L (2009)
Alarm Module: Service and Repair
Imoes Unit Replacement
Imoes Unit Replacement
1. Remove the dashboard/steering hanger beam. See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Dashboard/Steering Hanger Beam Removal/Installation
2. Disconnect the 5P connector (A) from the imoes unit (B), then remove the imoes unit.
3. Install the parts in the reverse order of removal.
4. After replacement, the immobilizer system must be registered in IMMOBILIZER with the HDS. See: Keyless Entry/Testing and
Inspection/Programming and Relearning