RL V6-3.7L (2009)
Communications Control Module: Service and Repair
HandsFreeLink Control Unit Removal/Installation
1. Remove the glove box. See: Body and Frame/Interior Moulding / Trim/Glove Compartment/Service and Repair/Glove Box Removal/Installation
2. Remove the passenger's under-dash fuse/relay box. See: Maintenance/Fuses and Circuit Breakers/Relay Box/Service and Repair/Passenger's
Under-Dash Fuse/Relay Box Removal/Installation
3. Remove the bolts from the bracket that holds the HandsFreeLink control unit (A), the throttle actuator control module, and the ACC unit.
4. Disconnect the connectors from the HandsFreeLink control unit.
5. Remove the HandsFreeLink control unit from the bracket.
6. Install the HandsFreeLink control unit in the reverse order of removal.
