RL V6-3.7L (2009)
Rear Vision Camera: All Technical Service Bulletins
Collision Avoidance - Rearview Camera Loose/Aimed Low
10-038
October 15, 2010
Applies To:
2009-10 RL - ALL
Rearview Camera Is Aimed Too Low or Is Loose
SYMPTOM
The rearview camera is aimed too low or is loose.
PROBABLE CAUSE
The rearview camera bracket angle is incorrect, or the camera bracket is broken.
CORRECTIVE ACTION
Replace the rear camera bracket.
PARTS INFORMATION
Rearview Camera Bracket Kit
(Kit includes bracket and two 3 x 12 mm screws):
P/N 39531-SJA-A91AH
Connector Clip (if needed):
P/N 91533-S82-003 Trim Clip (if needed):
P/N 91511-SJA-A01
TOOL INFORMATION
Plastic Trim Tool: T/N SILTRIMTL10
WARRANTY CLAIM INFORMATION
The normal warranty applies.
Operation Number:
0531B3
Flat Rate Time:
0.4 hour
Failed Part:
P/N 39530-SJA-A12
Defect Code:
03217
Symptom Code:
01801
Skill Level:
Repair Technician
REPAIR PROCEDURE
1. Open the trunk lid.