RL V6-3.7L (2009)
Front Door Weatherstrip: Service and Repair
Front Door Subseal Replacement
Front Door Subseal Replacement
NOTE:
-
Put on gloves to protect your hands.
-
Take care not to scratch the door.
-
Use a clip remover to remove the clips.
1. Detach the clips (A, B), then remove the lower subseal (C).
2. Remove these items:
-
Door panel See: Front Door Panel/Service and Repair/Front Door Panel Removal/Installation
-
Door sash inner trim See: Front Door Panel/Service and Repair/Front Door Sash Inner Trim Replacement
-
Power mirror See: Mirrors/Service and Repair/Power Mirror Replacement
-
Door sash outer trim
3. Detach the clips, then remove the upper subseal (A) from the front edge of the door.
4. Pull the upper subseal (A) away from the upper portion of the door sash flange (B), then remove the subseal.
5. Install the subseal in the reverse order of removal, and these items:
-
If the clips are damaged or stress-whitened, replace them with new ones.
