RL V6-3.7L (2009)
Rear Door Window Regulator: Service and Repair
Rear Door Glass, Quarter Glass, and Regulator Replacement
NOTE: Put on gloves to protect your hands.
1. Remove these items:
-
Door panel See: Front Door/Front Door Weatherstrip/Service and Repair/Front Door Weatherstrip Replacement
-
Door glass inner weatherstrip See: Rear Door Panel/Service and Repair/Rear Door Panel Removal/Installation
-
Door sash outer trim
2. Remove the screws, then remove the door pull pocket bracket (A). Disconnect the latch actuator connector (B), and remove the cap (C), and then
remove the plastic cover (D).
3. Carefully move the glass (A) until you can see the bolts through the oval holes in the door, then remove them.
4. Pull the glass run channel (A) away as needed, then remove the screw (B). Remove the bolts (C, D) securing the center channel (E), then remove
the collar (F).
