RL V6-3.7L (2009)
Fuel Door Release Actuator: Service and Repair
Fuel Fill Door Latch/Actuator Replacement
NOTE:
-
Put on gloves to protect your hands.
-
Take care not to scratch the body.
1. Remove the left trunk side trim panel. See: Trunk / Liftgate/Trunk / Liftgate Interior Trim Panel/Service and Repair/Interior Trim
Removal/Installation - Trunk Area
2. Remove the fuel fill door latch/actuator (A).
-1 Remove the fuel fill door latch (B) by turning it 90 ° from the body.
-2 Disconnect the actuator connector (C).
-3 Loosen the screws, then remove the actuator by sliding it forward.
3. Install the fuel fill door latch/actuator in the reverse order of removal, and note these items:
-
Apply multipurpose grease to the hood latch as indicated by the arrows.
-
Make sure the door opens properly, and locks securely.