RL V6-3.7L (2009)
Rear Fender Liner: Service and Repair
Rear Inner Fender Replacement
Special Tools Required
-
Push pin puller 07AAC-SJAA100
NOTE: Take care not to scratch the body.
1. Remove the rear suspension damper unit. See: Steering and Suspension/Suspension/Suspension Strut / Shock Absorber/Service and
Repair/Removal and Replacement/Rear Suspension
2. Remove the rear inner fender (A).
-1 Remove the screws (B) and the clip (C) from the rear bumper (D) and from the rear inner fender.
-2 Remove the clips (E, F).
-3 On the front of the rear wheel arch, remove the clips (G) securing the side sill (H) and rear inner fender.
-4 Pull out the rear inner fender.
-4 NOTE: Left side shown, right side is similar.
3. Install the inner fender in the reverse order of removal, and note these items:
-
If the clips are damaged or stress-whitened, replace them with new ones.
-
Push the clips into place securely.