RL V6-3.7L (2009)
Grille: Service and Repair
Upper Grille Replacement
Upper Grille Replacement
Special Tools Required
-
KTC trim tool set SOJATP2014*
*Available through the Acura Tool and Equipment Program.
NOTE:
-
Use the appropriate tool from the KTC trim tool set to avoid damage when prying components.
-
Take care not to scratch the bumper and the grille.
1. Remove the front bumper. See: Bumper/Front Bumper/Service and Repair/Front Bumper Removal/Installation
2. Detach the clips, then remove the upper grille (A).
3. If necessary, remove the screws, then remove the emblem base (A) and the grille molding (B) from the upper grille.
4. Install the grille in the reverse order of removal.