RL V6-3.7L (2009)
Carpet: Service and Repair
Carpet Replacement
Special Tools Required
-
KTC trim tool set SOJATP2014*
*Available through the Acura Tool and Equipment Program.
SRS components are located in this area. Review the SRS component locations See: Restraint Systems/Air Bag Systems/Locations and the precautions
and procedures See: Dashboard / Instrument Panel/Air Bag(s) Arming and Disarming/Service and Repair before doing repairs or service.
NOTE:
-
Put on gloves to protect your hands.
-
Use the appropriate tool from the KTC trim tool set to avoid damage when prying components.
-
Take care not to damage, wrinkle or twist the carpet.
-
Be careful not to damage the dashboard or other interior trim pieces.
1. Remove these items:
-
Front seats, both sides See: Seats/Service and Repair/Front Seat Removal/Installation
-
Rear seat cushion See: Seats/Service and Repair/Rear Seat Removal/Installation
-
Front door sill trim, both sides See: Scuff Plate/Service and Repair/Interior Trim Removal/Installation - Front Door Sill Area
-
Rear door sill trim, both sides See: Scuff Plate/Service and Repair/Interior Trim Removal/Installation - Rear Door Sill Area
-
B-pillar lower trim, both sides See: Trim Panel/Service and Repair/Interior Trim Removal/Installation - B-Pillar Lower Trim
-
Kick panel, both sides See: Scuff Plate/Service and Repair/Interior Trim Removal/Installation - Front Door Sill Area
-
Center console See: Console/Service and Repair/Removal and Replacement/Center Console Removal/Installation
-
Select lever bracket See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Shifter A/T/Service and Repair/Removal and
Replacement/A/T Shift Lever Removal
2. Detach the clips, then remove the footrest (A).
3. Push the knob (A) back to release the hooks (B), then pull up the accelerator pedal (C).
