RL V6-3.7L (2009)
Do not disassemble an airbag. It has no serviceable parts. Once an airbag has been deployed, it cannot be repaired or reused. For temporary storage of
the airbag during service, please observe the following precautions.
-
Store the removed airbag with the deployment surface up. Never put anything on the removed airbag.
-
To prevent damage to the airbag, keep it away from any oil, grease, detergent, or water.
-
Store the removed airbag on a secure, flat surface away from any high heat source (exceeding 200 °F/93 °C).
-
Never do electrical tests on the airbags, such as measuring resistance.
-
Do not position yourself in front of the airbag assembly during removal, inspection, or replacement.
-
For proper disposal of a damaged airbag, refer to airbag disposal. See: Restraint Systems/Air Bag Systems/Air Bag/Service and
Repair/Procedures
-
The side curtain airbag inflator assembly is a long, jointed part containing an inflator (A), a flexible bag (B), an adapter pipe (C), and a center
bracket (D).
