acura Workshop Repair Guides

Acura (Honda) Workshop Service and Repair Manuals

Air Bag(s) Arming and Disarming|Service and Repair|Page 8800 > < Air Bag(s) Arming and Disarming|Service and Repair|Page 8798
Page 10
background image

Side Airbag

4. Disconnect driver's and front passenger's side airbag 2P connectors (A) from the left side wire harness or right side wire harness.

Side Curtain Airbag

5. Remove the headliner.  See: Headliner/Service and Repair Disconnect both side curtain airbag harness 2P connectors (A) from the side curtain

airbags.

Seat Belt Tensioner

6. Remove the B-pillar lower trim.  See: Trim Panel/Service and Repair/Interior Trim Removal/Installation - B-Pillar Lower Trim Disconnect both

floor wire harness 4P connector (A) from the seat belt tensioners.

SRS Unit

7. Remove the center console,  See: Console/Service and Repair/Removal and Replacement/Center Console Removal/Installation then remove the

rear vent duct A.  See: Service and Repair/Dashboard/Steering Hanger Beam Removal/Installation Disconnect SRS unit connector A (28P), SRS
unit connector B (28P), and/or SRS unit connector C (28P) from the SRS unit.

Air Bag(s) Arming and Disarming|Service and Repair|Page 8800 > < Air Bag(s) Arming and Disarming|Service and Repair|Page 8798