RL V6-3.7L (2009)
Scuff Plate: Service and Repair
Interior Trim Removal/Installation - Front Door Sill Area
Interior Trim Removal/Installation - Front Door Sill Area
Special Tools Required
-
KTC trim tool set SOJATP2014*
*Available through the Acura Tool and Equipment Program.
Front Door Sill Area
NOTE:
-
Put on gloves to protect your hands.
-
Take care not to bend or scratch the trim and the panels.
-
Use the appropriate tool from the KTC trim tool set to avoid damage when prying components.
1. Detach the hooks (A) and the tabs (B) from the kick panel (C) and B-pillar lower trim (D), and pull the front door sill trim (E) up by hand to
detach the clips (F), then remove it from the front door opening trim (G).
2. If necessary, pull the front side outer trim (H) up to detach the clips (I), then remove the trim.
3. Remove the left kick panel (A) or the right kick panel (B).
-1 Pull out the door opening trim (C) as needed from the kick panel hooks (D) and the door opening flange.
-2 Pull the kick panel back by hand to detach the clips (E, F), then remove it.
Driver's
Passenger's