RL V6-3.7L (2009)
Power Seat Motor: Testing and Inspection
Driver's Power Seat Motor Test
Driver's Power Seat Motor Test
Slide motor, Front up-down motor, Rear up-down motor
1. Remove the driver's seat. See: Service and Repair/Front Seat Removal/Installation
2. Disconnect the connector from each power seat motor.
3. Test each motor by connecting power and ground according to the table. When the motor stops running, disconnect battery power immediately.
4. If the motor does not run or fails to run smoothly, replace it:
-
Slide motor See: Service and Repair/Front Seat Slide Motor Replacement
-
Front up-down motor See: Service and Repair/Front Seat Up-Down Motor Replacement
-
Rear up-down motor See: Service and Repair/Front Seat Up-Down Motor Replacement
Recline motor
1. Remove the driver's seat-back cover. See: Seat Cover/Service and Repair/Front Seat-back Cover Replacement
2. Disconnect the 5P connector from the recline motor.
