RL V6-3.7L (2009)
Power Seat Motor: Testing and Inspection
Front Passenger's Power Seat Motor Test
Front Passenger's Power Seat Motor Test
1. Remove the front passenger's seat. See: Service and Repair/Front Seat Removal/Installation
NOTE: For recline motor test only, remove the seat-back cover. See: Seat Cover/Service and Repair/Front Seat-back Cover Replacement
2. Disconnect the connector from the each power seat motor.
3. Test each motor by applying battery voltage and body ground to the table. When the motor stops running, disconnect battery power immediately.
4. If the motor does not run or fails to run smoothly, replace the motor.
-
Slide motor See: Service and Repair/Front Seat Slide Motor Replacement
-
Front up-down motor See: Service and Repair/Front Seat Up-Down Motor Replacement
-
Rear up-down motor See: Service and Repair/Front Seat Up-Down Motor Replacement
-
Recline motor See: Service and Repair/Front Seat Recline Motor Replacement