RL V6-3.7L (2009)
Seat Heater: Testing and Inspection
Seat Heater Test (With Seat Ventilator)
Seat Heater Test
Driver's Seat
1. Remove the driver's seat, See: Service and Repair/Front Seat Removal/Installation then remove the seat-back cover. See: Seat Cover/Service and
Repair/Front Seat-back Cover Replacement
2. Disconnect the 5P connector (A) from the seat cushion heater and 2P connector (B) from the seat-back heater.
Seat Cushion Heater Test
3. Check for continuity between the seat cushion heater 5P connector terminals No. 2 and No. 3. There should be continuity. If there is no continuity,
replace the seat cushion heater.
4. Check for continuity between the seat cushion heater 5P connector terminals No. 1 and No. 4. There should be continuity, replace the seat cushion
heater.
Seat-back Heater Test
5. Check for continuity between the seat-back heater 2P connector terminals No. 1 and No. 2. There should be continuity. If there is no continuity,
replace the seat-back heater.
6. Reconnect the 5P and 2P connectors to the seat heaters, and check for continuity between the seat cushion heater 5P connector terminal No. 5 and
the seat-back heater 2P connector terminal No. 2. There should be continuity. If there is no continuity, repair an open in the wire between the seat
cushion heater and the seat-back heater.