RL V6-3.7L (2009)
Seat Heater Switch: Service and Repair
Seat Heaters Switch Test/Replacement
Front Seat
1. Remove the center console panel. See: Interior Moulding / Trim/Console/Service and Repair/Removal and Replacement/Center Console
Removal/Installation
2. Disconnect the 6P connector from the seat heater switch (A).
3. Remove the two screws and the switch.
4. Check for continuity between the terminals in each switch position according to the table.
5. If the continuity is not as specified, replace the illumination bulbs (B) or the switch.
Rear Seat
1. Remove the console trim. See: Interior Moulding / Trim/Console/Service and Repair/Removal and Replacement/Center Console Armrest
Removal/Installation
2. Disconnect the 6P connector from the seat heater switch (A).
3. Remove the two screws and the switch.
4. Check for continuity between the terminals in each switch position according to the table.
5. If the continuity is not as specified, replace the illumination bulbs (B) or the switch.
