RL V6-3.7L (2009)
12. Apply M-77 assembly paste (P/N 08798-9010) to both sides of the pad shim (A), the back of the brake pads (B), and the other areas indicated by
the arrows. Wipe excess assembly paste off the pads. Contaminated brake discs or pads reduce stopping ability. Keep paste off the brake discs and
pads.
13. Install the brake pads correctly. Install the brake pad with the wear indicator (C) on the inside.
If you are reusing the brake pads, always reinstall the brake pads in their original positions to prevent a momentary loss of braking efficiency.
14. Install the pad spring (A). Hold the pad spring and install the pad pins (B) into the caliper from the outside to the inside of vehicle.
15. First insert the clip ends (A) to the pad pins (B), and then twist the clip into the caliper hole (C) to stabilize.
16. Clean the mating surface of the brake disc and the inside of the wheel, then install the front wheels.
17. Press the brake pedal several times to make sure the brakes work.
NOTE: Engagement of the brakes may require a greater pedal stroke immediately after the brake pads have been replaced as a set. Several
applications of the brake pedal will restore the normal pedal stroke.
18. Add brake fluid as needed.
19. After installation, check for leaks at the brake hose and line joints or connections, and retighten if necessary.
20. Reinstall the front wheels, then test-drive the vehicle.
