RL V6-3.7L (2009)
Major Adjustment (to be done when replacing parking brake shoes and after lining surface break-in)
1. Raise the rear of the vehicle, and support it with safety stands in the proper locations. See: Maintenance/Vehicle Lifting/Service and Repair
2. Release the parking brake pedal fully.
3. Back off the adjusting nut (A) in the parking brake pedal.
4. Remove the rear wheels.
5. Remove the access plug (A).
6. Use a flat tip screwdriver (B) to rotate the adjuster assembly (C) until the shoes lock against the parking brake drum. Then back off the adjuster 12
clicks, and install the access plug.
7. Clean the mating surface of the brake disc/drum and the inside of the wheel, then install the rear wheels.
8. Do the minor adjustment procedure.
