RL V6-3.7L (2009)
Vacuum Brake Booster: Service and Repair
Brake Booster Replacement
1. Remove the master cylinder. See: Hydraulic System/Brake Master Cylinder/Service and Repair
2. Disconnect the vacuum hose (A) from the brake booster (B).
3. Remove the engine wire harness (A) from the harness brackets (B), and move the engine wire harness aside.
4. Loosen the clevis nut (A), then remove the lock pin (B) and the clevis pin (C).
5. Remove the brake booster mounting nuts (D) and the clevis (E).
6. Twist the brake booster (A) forward while pulling out.