RL V6-3.7L (2009)
Cruise Control Switch: Testing and Inspection
Adaptive Cruise Control (ACC) Distance Switch Test
1. Remove the driver's airbag. See: Restraint Systems/Air Bag Systems/Air Bag/Service and Repair/Removal and Replacement/Driver's Airbag
Replacement
2. Disconnect the 20P connector (A) from the cable reel.
3. Check for continuity between 20P connector terminals No. 5 and No. 14.
-
There should be continuity with the distance switch pressed.
-
There should be no continuity with the distance switch released.
4. If the continuity is not as specified, replace the cruise control combination switch assembly. See: Testing and Inspection/Component Tests and
General Diagnostics/Cruise Control Combination Switch Test (With ACC/CMBS)
