RL V6-3.7L (2009)
12. Turn the ignition switch to ON (II).
13. Check for DTCs with the HDS.
NOTE: If DTC 61 or DTC 62 is indicated, troubleshoot the indicated DTC first.
14. Start the engine.
15. Turn the ACC switch (A) ON.
16. Select ADAPTIVE CRUISE CONTROL (ACC) from DRIVING SUPPORT menu. Select RADAR AIMING from ADJUSTMENT menu, the
MID will indicate the number "4" on its display for 2 seconds then display "NO TARGET".
17. Make sure the MID indicates "NO TARGET" on its display.
NOTE: When the radar is aimed correctly the MID indicates "NO TARGET". If this is not indicated there is an unwanted radar reflection in front
of the vehicle in the range of the radar.
18. Confirm the result of the horizontal auto aiming following the on screen instructions of the HDS.
NOTE: The result of all auto aiming can be confirmed by the HDS, by the figure and words displayed on the MID, or by the brake lights
illuminating. When the figure is not in the range 100±2 or a tone is sounded by the vehicle when the aiming point is out of specification, or when
the brake lights do not come on, the auto aiming is not completed correctly. If DTC 120, 121,122, 123, or 124 is indicated, the aiming target is not
set correctly. Reset the aiming target.
