RL V6-3.7L (2009)
Water Pump: Testing and Inspection
Water Pump Inspection
1. Remove the timing belt. See: Engine/Timing Components/Timing Belt/Service and Repair/Timing Belt Removal
2. Turn the water pump counterclockwise, and make sure that it turns freely. If it doesn't, replace the water pump. See: Service and Repair/Water
Pump Replacement
NOTE: When you check the water pump, you may see a small amount of "weeping" from the bleed holes (A). This is normal.
3. Install the timing belt. See: Engine/Timing Components/Timing Belt/Service and Repair/Timing Belt Installation
