RL V6-3.7L (2009)
3. Disconnect the manifold absolute pressure (MAP) sensor connector (A), then remove the breather pipe (B) and the intake air duct (C).
4. Disconnect the throttle actuator connector (A) and the evaporative emission (EVAP) canister purge valve connector (B), then remove the water
bypass hoses (C), the EVAP hose (D), the brake booster vacuum hose (E), and the vacuum hose (F).
5. Remove the positive crankcase ventilation (PCV) hose (A), and disconnect the intake manifold tuning (IMT) actuator connector (B).
