RL V6-3.7L (2009)
Crankshaft Gear/Sprocket: Service and Repair
Timing Belt Drive Pulley Replacement
1. Remove the timing belt. See: Timing Belt/Service and Repair/Timing Belt Removal
2. Remove the crankshaft position (CKP) sensor. See: Powertrain Management/Computers and Control Systems/Crankshaft Position Sensor/Service
and Repair
3. Remove the timing belt drive pulley (A).
4. Inspect the timing belt drive pulley and the key (B) for damage. If it is cracked or damaged, replace the timing belt drive pulley.
5. Install the timing belt drive pulley.
6. Install the CKP sensor. See: Powertrain Management/Computers and Control Systems/Crankshaft Position Sensor/Service and Repair
7. Install the timing belt. See: Timing Belt/Service and Repair/Timing Belt Installation
