RL V6-3.7L (2009)
Valve Clearance: Adjustments
Valve Clearance Adjustment
NOTE: Adjust the valves only when the cylinder head temperature is less than 100 °F (38 °C).
1. Remove the right upper fender trim.
2. Remove the cylinder head covers. See: Cylinder Head Assembly/Valve Cover/Service and Repair/Cylinder Head Cover Removal
3. Set the No. 1 piston at top dead center (TDC).
Align the pointer (A) on the front upper cover with the No. 1 piston TDC mark (B) on the front camshaft pulley.
4. Select the correct thickness feeler gauge for the valves you are going to check.
REAR
FRONT