RL V6-3.7L (2009)
Control Assembly: Service and Repair
Climate Control Unit Removal/Installation
Climate Control Unit Removal/Installation
1. Remove the audio unit. See: Accessories and Optional Equipment/Radio, Stereo, and Compact Disc/Service and Repair/Audio Unit
Removal/Installation
2. Remove the self-tapping screws and the climate control unit (A).
3. Discharge the static electricity (which accumulated on you when you removed the climate control unit) by touching the door striker or other body
parts.
4. Remove the self-tapping screws, then carefully separate the climate control unit (A) from the climate control panel (B). Disconnect the connector
(C) from the climate control unit. Do not kink or pull on the wires between the control panel and the control unit. Do not touch the electronic
components on the printed circuit board in the control unit and the control panel.
5. Install the control unit in the reverse order of removal. After installation, operate the various functions to see whether it works properly.
6. Run the self-diagnostic function to confirm that there are no problems in the system. See: Testing and Inspection/Initial Inspection and Diagnostic
Overview
