RL V6-3.7L (2009)
Driver/Vehicle Information Display: Service and Repair
Select/Reset/Information Switch Test/Replacement
1. Remove the driver's airbag assembly. See: Restraint Systems/Air Bag Systems/Air Bag/Service and Repair/Removal and Replacement/Driver's
Airbag Replacement
2. Disconnect the 6P connector (A) from the select/reset/information switch (B).
3. Measure the resistance between the select/reset/information switch 6P connector terminals No. 6 and No. 5 in each switch position according to
the table.
4. If the resistance is not as specified, remove the two screws, and replace the switch.
5. If the switch is OK, but there is a problem with the switch function, check the steering switches harness and cable reel.
