RL V6-3.7L (2009)
Odometer: Testing and Inspection
Symptom Troubleshooting
Symptom Troubleshooting: Trip computer-no fuel information
Trip computer-no fuel information
Diagnostic Test: Self-Diagnosis Mode
NOTE:
-
Check the vehicle battery condition first.
-
Always check for and resolve all CAN DTCs before troubleshooting the navigation system.
-
Check the connectors for poor connections or loose terminals.
-
The navigation only displays the trip information. The calculations are done in the gauge control module.
-
Before troubleshooting, make sure you have the anti-theft codes for the audio system and the navigation system.
-
After troubleshooting, enter the navigation system anti-theft codes.
-
Verify that the correct navigation unit is installed for this model. Go into the diagnostic mode, and use Version. See: Accessories and Optional
Equipment/Navigation System/Testing and Inspection/Initial Inspection and Diagnostic Overview/Navigation System Diagnostic Mode
-
Make sure that the correct DVD color and version are installed.
-
Check any official Honda service website for more service information about the navigation system.
Do the System Links check See: Accessories and Optional Equipment/Navigation System/Testing and Inspection/Initial Inspection and Diagnostic
Overview/Navigation System Diagnostic Mode to check the communication line between the PCM (FI-ECU) and the navigation unit.
1. Start the engine.
2. Go into the Self-Diagnosis Mode, and use Trip Information diagnostic under System Links. See: Accessories and Optional Equipment/Navigation
System/Testing and Inspection/Initial Inspection and Diagnostic Overview/Navigation System Diagnostic Mode
Are the values greater than zero?
YES - The system is OK.
NO - Check for B or F-CAN DTCs, then troubleshoot them.