RL V6-3.7L (2009)
Door Switch: Testing and Inspection
Door Switch Test
Driver's Door
1. Remove the driver's door panel. See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Front Door Panel/Service and Repair/Front
Door Panel Removal/Installation
2. Disconnect the 2P connector (A) from the door switch (B).
3. Check for continuity between terminals No. 1 and No. 2.
-
There should be continuity with the door open.
-
There should be no continuity with the door closed.
4. If the continuity is not as specified, replace the door lock actuator.
Front Passenger's and Rear Door
1. Remove the front passenger's door panel See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Front Door Panel/Service and
Repair/Front Door Panel Removal/Installation or rear door panel. See: Body and Frame/Doors, Hood and Trunk/Doors/Rear Door/Rear Door
Panel/Service and Repair/Rear Door Panel Removal/Installation
2. Disconnect the 2P connector (A) from the door switch (B).
3. Check for continuity between terminals No. 1 and No. 2.
-
There should be continuity with the door open.
-
There should be no continuity with the door closed.
4. If the continuity is not as specified, replace the door lock actuator.