RL V6-3.7L (2009)
Vanity Lamp: Testing and Inspection
Vanity Mirror Light Test
1. Open the sunvisor.
2. Remove the sunvisor. See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair
3. Disconnect the 2P connector (A) from the vanity mirror light.
4. Check for continuity between terminals No. 1 and No. 2.
-
With the vanity mirror cover (B) opened, there should be continuity.
-
With the vanity mirror cover closed, there should be no continuity.
NOTE: Make sure the sunvisor is fully retracted.
5. If the continuity is not as specified, replace the bulb (C) or the sunvisor.