RL V6-3.7L (2009)
-
Disconnect the HDS from the DLC.
-
Reboot the HDS.
-
Reconnect the HDS to the DLC, and try the update procedure again.
8. If the TP POSITION CHECK failed in step 5, clean the throttle body. See: Fuel Delivery and Air Induction/Throttle Body/Service and
Repair/Procedures
9. Do the PCM idle learn procedure. See: Testing and Inspection/Programming and Relearning/PCM Idle Learn Procedure
10. Do the CKP pattern learn procedure. See: Testing and Inspection/Initial Inspection and Diagnostic Overview
