RL V6-3.7L (2009)
Fuel Pressure Regulator: Service and Repair
Fuel Pressure Regulator Replacement
NOTE: If the fuel tank is full, drain the fuel. See: Service and Repair
1. Remove the fuel tank unit. See: Fuel Pump/Service and Repair/Fuel Tank Unit Removal and Installation
2. Remove the fuel pressure regulator (A).
3. Install the parts in the reverse order of removal with a new O-ring (B).
NOTE:
-
Coat the O-rings with clean engine oil; do not use any other oils or fluids.
-
Do not pinch the O-rings during installation.
-
Use all the new parts supplied in the pressure regulator replacement kit.